Ancillaries – Fully Bonded Sheet Systems
Triton supplies a full range of ancillary products for the installation of fully bonded sheet (Type A) waterproofing systems. This range includes primers, reinforcing tapes and a cement based sealing product.
TWS Primer/TWS Primer LT
TWS Primer/TWS Primer LT
A primer for use in conjunction with TWS-EX100 and TWS-EX100GM waterproof membranes in order to consolidate the substrate and ensure complete bond development. The ‘LT’ (low temperature) version is classed as moisture tolerant and can be applied to damp or slightly green concrete.
Supplied as a single pack, brush applied liquid coating. Coverage – 8 m2 per litre. Available in 5 and 25 litre packs.
Triton TWS Reinforcing Tape
For use with TWS fully bonded waterproof membranes for the reinforcement of edge and corner details.
Triton Fillet Seal
Triton Fillet Seal is a pre-packed cement based and polymer modified product for use as a floor to wall junction seal during waterproofing works when using cementitious slurry coatings such as Triton TT55. In most circumstances, Fillet Seal needs only be mixed with water for use. Where extra adhesion is required, Triton SBR may be used. Note: Where water is leaking or seeping the use of Triton Quick Set is advised.
The use of Fillet Seal helps to ensure a smooth transition between horizontal and vertical surfaces that will minimise the risk of leaving gaps or holes unsealed during the waterproofing works.
Preparation:
Situations where the Fillet Seal will be employed should already have been prepared in accordance with the slurry coating or render specification. In the majority on instances, the Fillet Seal will be applied on to the slurry coated surface.
Triton Fillet Seal is available in 25 kg bags.
