Triton’s range of epoxy products are principally designed for structural and non-structural timber repair and masonry repair. Within this range are structural grouts for repairing voids or bearing ends in timber affected by insect attack or rot, non-structural mortars for filling voids in timber or masonry, adhesives for bonding structural fixings, consolidants for insect damaged and friable timber, and waterproof coatings for walls and floors, above and below ground.
A 3-component system which provides a cold or warm setting, lightweight, low slump filler for use in non-structural applications.
Ideal for fast repair of concrete in vertical and overhead work and rapidly attains mechanical strength sufficient to exceed that of good quality concrete.
A two component low viscosity epoxy resin system which creates an almost colourless liquid to provide a cold or warm setting consolidant for wood. Will consolidate friable, worm infested or tack-damaged furniture and provide a base upon which to carry out further restoration. Supplied in 1.34 litre packs.
A three component, pourable epoxy resin system for use as a structural grout. Cold or warm setting, Trimol 36 gives a structurally discreet back-fill, principally for timber repairs. The cured product creeps sufficiently under loading to accommodate movement in complex timber joints. A versatile product for site repairs to rotten, insect or fire damaged timbers and to remake joints or breaks. Recommended for use with Trimol 50 reinforcement rods. Supplied in 2.69 or 8.13 litre packs.
A two component water based epoxy coating for floors and walls. Trimol 40 is typically used to provide a damp proof membrane on walls and floors either on its own as a wearing surface or in a “sandwich” construction between sand and cement renders. Can be applied to brick, concrete, stone and cement renders when damp. Supplied in 1, 2.5 and 5 kg packs.
Manufactured from glass reinforced resin by “pultrusion”. Trimol 50 rods have outstanding tensile strength compared to steel, are flexible and compatible with Trimol 36 structural grout. Supplied in a range of sizes from 3 – 25mm diameter.
A two-component epoxy resin system (for use in “side by side” cartridges) formulated as an anchoring adhesive to give a strong, stress free joint within brick, stone, mortar or timber structures. A solvent free thixotropic product which cures in cold, damp conditions. Supplied in 400ml cartridges.
Triseal is a solvent free, two part epoxy resin coating, typically used as a surface damp proof membrane and a water vapour suppressant. Ideal for use beneath raised access floors, in plant rooms and bunded areas. It is also suitable for application on damp surfaces, such as sand/cement and cement floors subject to rising damp or containing residual construction moisture. Triseal can be used as a general purpose coating for surfaces subject to foot and light wheeled traffic. Triseal can be applied using a brush or medium pile roller onto sound, clean surfaces.
Can't find what you're looking for? We can help.