Results

Triton Shield System

A premium, pre-applied concrete waterproofing system incorporating a mesh membrane and stretchable sealing tape.

The fully-bonded, pre-applied (applied prior to pouring concrete) system comprises the unique Triton Shield Membrane and Triton Shield Stretch Tape that, when used in combination, offer a cost effective, fast to install, very lightweight and durable solution for waterproofing protection.

Triton TT Vapour Membrane

A ready blended coating that once cured, provides a waterproof Methane and Carbon Dioxide barrier. Triton TT Vapour Barrier can be retro-applied as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an alternative to sheet membranes in new construction. It can be applied by airless spray, roller or brush to walls, floors and soffits.

Triton Hydrolock

Triton Hydrolock, when used with properly designed concrete, can be used as fully bonded Type A waterproofing protection as defined in BS 8102: 2022 for the waterproofing of new structures.

Triton Hydrolock is a bentonite membrane (often known as a ‘bentonite carpet’) comprising a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite, embedded between two layers of geotextile. The internal natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier.

BBA certified Triton Hydrolock can be used externally on concrete to provide an effective barrier to the transmission of liquid water where Grades 1 to 3 waterproofing protection are required as defined in table 2 of BS 8102: 2022.

Triton TT55 ME

Triton TT55 ME is a two component polymer modified cement based, flexible, protective and waterproof membrane coating. It is suitable for either vertical or horizontal surfaces and ideal for areas which are liable to cracking or deformation on the surface, and can be successfully used at wall/floor junctions. The polymer emulsion additive imparts high adhesion and flexibility along with its own high level of water resistance. It is suitable for the internal and external waterproofing of concrete, sound brickwork and cement based elements of water retaining and water resisting structures such as basements, retaining walls, lift pits, swimming pools, construction joints, underpinning joints, balcony decks, bund linings or terraces etc.

Triton TT55

A single component, polymer modified cement “tanking” system for walls and floors, designed to be applied as a waterproof slurry. TT 55 is a highly effective damp proof membrane for brickwork, concrete or any cementitious substrate. Surfaces to be treated with TT55 should be correctly prepared, free from all loose materials and contaminants and be in a sound and solid condition. For application to floors, TT55 should be applied directly to the structural slab. For wall applications, TT55 should be sandwiched between sand/cement render coats. For all TT55 applications, special attention should be given to wall/floor junctions.

Triton TT Super

A surface applied system which waterproofs and protects concrete in depth. Supplied as a powder which only needs mixing with water before application on: basements/retaining walls, concrete slabs (floor/roof/balcony), construction joints, water retaining structures, swimming pools, reservoirs, sewage treatment plants, channels and potable water tanks. When applied to a concrete surface, the active chemicals combine with the free lime and moisture present in the capillary tract to form insoluble crystals which block capillaries and minor shrinkage cracks to prevent any further water ingress (even under pressure). However the product still allows the passage of water vapour through the structure, allowing the concrete to ‘breathe’. It also protects concrete against seawater, aggressive ground water and certain chemical solutions.

Triton Shield Stretch Tape

A unique, stretchable, waterproof and gas proof sealing tape. Triton Shield Stretch Tape speeds up membrane installation by conforming to the shape of curved, convex or concave profiles. Suitable for use in the installation of damp proofing, waterproofing and gas proofing membranes, this highly versatile tape can be used at the wall/floor junction; to seal abutting or overlapping membrane edges, or wherever a seal is needed around awkward, contoured or shaped corners. Up to a 90o turn is achievable without the need to cut the self-adhesive tape.