Please also see full list of pump and drainage options.
A unique chemical treatment for the waterproofing, protection of concrete and increase durability – designed to be used as an admix at the time of batching. The active chemicals react with fresh concrete to generate a non-soluble crystalline formation which actively seals the concrete itself against the penetration of water or liquid, protecting it from the deterioration effect of harsh environmental conditions.
A ready blended coating that once cured, provides a waterproof Methane and Carbon Dioxide barrier. Triton TT Vapour Barrier can be retro-applied as a waterproof and gas-proof membrane to concrete, masonry and brick substrates or as an alternative to sheet membranes in new construction. It can be applied by airless spray, roller or brush to walls, floors and soffits.
A single pack, moisture curing elastomeric resin. The membrane cures in a continuous and elastic form, as a totally adhered layer. The waterproofing layer guarantees total watertightness and withstands building movements. Can be used as a base coat, reinforcing layer or top coat. Typical applications include low pitch and flat roof areas with pedestrian traffic, wet rooms, kitchens, lightly trafficked flooring, water channels and ponds.
Triton TT55 ME is a two component polymer modified cement based, flexible, protective and waterproof membrane coating. It is suitable for either vertical or horizontal surfaces and ideal for areas which are liable to cracking or deformation on the surface, and can be successfully used at wall/floor junctions. The polymer emulsion additive imparts high adhesion and flexibility along with its own high level of water resistance. It is suitable for the internal and external waterproofing of concrete, sound brickwork and cement based elements of water retaining and water resisting structures such as basements, retaining walls, lift pits, swimming pools, construction joints, underpinning joints, balcony decks, bund linings or terraces etc.
A single component, polymer modified cement “tanking” system for walls and floors, designed to be applied as a waterproof slurry. TT 55 is a highly effective damp proof membrane for brickwork, concrete or any cementitious substrate. Surfaces to be treated with TT55 should be correctly prepared, free from all loose materials and contaminants and be in a sound and solid condition. For application to floors, TT55 should be applied directly to the structural slab. For wall applications, TT55 should be sandwiched between sand/cement render coats. For all TT55 applications, special attention should be given to wall/floor junctions.
A BBA certified, cementitious, waterproofer supplied ready to mix with clean water to provide a slurry coating that provides protection against active or passive water pressure on concrete and masonry surfaces.
Typical areas of application include foundations, slabs, retaining walls plus drinking water structures.
A crystalline waterproofing admixture with hydrophobic effects. Triton Liquid Waterproofer is a liquid admixture for designing a water-tight concrete with innovative ‘2 in 1’ technology.
TWS-EX100GM is a highly efficient waterproofing membrane which also acts as a barrier to Radon, Methane, Carbon Dioxide and other ground gases and contaminants. The self adhesive membrane uses aluminium as the primary barrier, which is reinforced and protected by a laminated film of biaxually oriented HDPE film to one side and a robust bitumen rubber to the other. A selvedge of bitumen rubber facilitates easier lap seals.
Triseal is a solvent free, two part epoxy resin coating, typically used as a surface damp proof membrane and a water vapour suppressant. Ideal for use beneath raised access floors, in plant rooms and bunded areas. It is also suitable for application on damp surfaces, such as sand/cement and cement floors subject to rising damp or containing residual construction moisture. Triseal can be used as a general purpose coating for surfaces subject to foot and light wheeled traffic. Triseal can be applied using a brush or medium pile roller onto sound, clean surfaces.
A BBA certified, cementitious, in-depth waterproofer, based on grey Portland Cement and designed to be mixed with clean water to waterproof concrete surfaces such as foundations, slabs, retaining walls, construction joints, sewage treatment plants, swimming pools, backfilled structural elements etc, plus drinking water structures.
Can't find what you're looking for? We can help.