Triton Chemical Manufacturing Co. Ltd

Tel: 020 8310 3929

To complete the clause, select the appropriate wording from below. Highlighted text can be dragged and dropped to save typing.

C45 Damp Proof Course Renewal/Inspection
220 Chemical Injection DPC System

Triton Chemical Manufacturing Co. Ltd produce a range of damp proofing products for a wide range of applications. The company's network of reputable contractors has access to the Triton Users Guarantee which backs up the contactors own guarantees, providing protection in the event of the contractor ceasing to trade during the guarantee period.

Click on the name below to jump to the product and specification details.

Tri-gel

BBA approved rising damp treatment. Certificate No 95/3210.

Tri-gel is a water based and water-soluble thixotropic gel which diffuses naturally into damp substrates and reacts to form a water-repellent silicone resin network.

The network is permeable to water vapour allowing walls to breathe.

The product is injected using a cartridge gun or hand-operated compression pump into 12mm diameter holes, drilled horizontally into the chosen mortar bed at 100-120mm centres or at the perpendicular joint.

Installation of all Triton chemical damp proof courses should follow the guidelines laid down in BS 6576: 1985. British Standard Code of Practice for Installation of Chemical Damp Proof Courses and the BWPDA Code of Practice The Installation of Remedial Damp-Proof Courses in Masonry Walls.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Triton Tri-gel

Triject Rapid

Triject Rapid is a water-based DPC system using surfactant technology to match the rapid penetration levels of solvent based systems.

Triject Rapid forms a continuous barrier to the passage of rising moisture, producing a water-repellent silicone resin network within the capillaries of the substrate.

The active ingredient is potassium methyl siliconate.

Triject Rapid is diluted with nine parts of water and pressure injected using pressures between 20 and 50psi.

Installation of all Triton chemical damp proof courses should follow the guidelines laid down in BS 6576: 1985. British Standard Code of Practice for Installation of Chemical Damp Proof Courses and the BWPDA Code of Practice The Installation of Remedial Damp-Proof Courses in Masonry Walls.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Triton Triject Rapid.

Tri-ject 2

BBA Certified organic solvent DPC liquid designed for injection into walls affected by rising damp.

Following injection into pre-drilled holes in either bricks or mortar joints, Triject 2 reacts with water already present to form an permanent water -repellent coating within the capillaries of the masonry.

Triject 2 is supplied ready to use and contains 4.0% w/w active silicone resin.

The resin is dissolved in a hydrocarbon solvent of the white spirit type.

Injection holes should be pressure injected using a pressure of around 100psi.

Installation of all Triton chemical damp proof courses should follow the guidelines laid down in BS 6576: 1985. British Standard Code of Practice for Installation of Chemical Damp Proof Courses and the BWPDA Code of Practice The Installation of Remedial Damp-Proof Courses in Masonry Walls.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Triton Triject 2.

Triject 3

A water-based DPC system designed to be injected into walls affected by rising damp.

After injection into either the bricks or mortar joints, Triject 3 reacts with carbon dioxide to form a permanent water repellent coating within the capillaries of the masonry.

The main ingredient is potassium methyl siliconate. The product is diluted with six parts water to one part concentrate to provide 5% concentration. Each injection hole is pressure injected using a pressure of 20-50psi until fluid is seen to reach the surface of the wall.

Installation of all Triton chemical damp proof courses should follow the guidelines laid down in BS 6576: 1985. British Standard Code of Practice for Installation of Chemical Damp Proof Courses and the BWPDA Code of Practice The Installation of Remedial Damp-Proof Courses in Masonry Walls.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Triton Triject 3.

Triton Injection Mortar

A single component injection mortar, designed for use with most types of masonry, brick and blockwork and random rubble filled constructions and designed to stop rising damp.

Triton Injection Mortar is based on Ordinary Portland Cement, selected fine quartz aggregates and active waterproofing chemicals.

It activates due to a chemical reaction with moisture in the structure forming a crystalline growth that blocks the capillaries, pores and fine cracks in the mortar.

Triton Injection Mortar is applied using a hand caulking gun. 19-22mm holes are drilled at 110mm spacing and at a depressed angle of 30�, finishing in a mortar bed at DPC level.

Rubble infill or thick walls can be drilled (with staggered centres) from either side to approximately half the wall width.

All holes should be flushed with clean water prior to the injection of the mortar.

In walls less than 120mm thick the mortar bed should be raked out at the desired level to between one third and one half of its depth.

After flushing with water the mortar should be trowel applied to the joint. Re-plastering using a salt retardant render additive such as Trimix 1 is essential if hygroscopic salts and residual moisture are to be held back.

Installation of all Triton chemical damp proof courses should follow the guidelines laid down in BS 6576: 1985. British Standard Code of Practice for Installation of Chemical Damp Proof Courses and the BWPDA Code of Practice The Installation of Remedial Damp-Proof Courses in Masonry Walls.

Consult Triton Chemical Manufacturing Co. Ltd technical literature for details. Triton Chemical Manufacturing Co. Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Triton Chemical Manufacturing Co. Ltd, Unit 5, Lyndean Industrial Estate, Abbey wood, London SE2 9SG. Tel: 020 8310 3929. Fax: 020 8312 0349.
Email info@triton-chemicals.com Web: www.triton-chemicals.com

Product reference: Triton Injection Mortar.